Instrument Interface is an eurorack pre-amp capable to bring any type of audio signal to modular levels thanks to its amplification circuit.The module can drive regular and condenser microphones (+48V Phantom Powered) as well as Instrument and Line signals with a very low distortion ratio.Instrument..
Our new Output Module is designed to be the master output for your modular system, providing an extra Cue Input to monitor any signal.FEATURESLeft IN is routed to both channels when no Right signal is present. Both Outputs are TRS balanced.A Headphones out is available. You can route Headphone OUT t..
Electric Guitar InterfaceInjectr is a fully-equipped electric guitar and bass interface for eurorack synthesizers. The module features an overdrive-capable preamp, versatile amp simulator, and control voltage extractors designed to inject stringed instrument signals directly into the modular environ..
Master Output ControlMonitr is a comprehensive audio output monitoring utility for eurorack systems. The module is equipped with a stereo VCA-controlled input mixer with master volume control and VU meters, plus a powerful headphone section for both live performance and detailed monitoring.Features-..
S/PDIF Digital ConverterSpdf is a digital signal encoder and decoder for eurorack modular synthesizers. The module converts analog audio and CV signals to and from the S/PDIF format to interconnect digitally with computer audio interfaces and other S/PDIF enabled devices.Features- Encodes 2 analog i..
Guitar Pedal FX InterfaceUniFX is a compact and flexible effects interface that interconnects guitar pedals and electronic instruments with eurorack synthesizers. The module re-scales audio levels, offers voltage-control over the dry/wet mix, and uniquely allows for the primary and effects signals t..
STEREO SIGNAL INTERCHANGEUltra-low noise buffered level scaling designed for stereo effects pedalsTwo stereo sends with selectable -12/-18 dB attenuationOne stereo receive with selectable +12/+18 dB amplificationFunctional as auxiliary line-level audio input and outputSend & Receive in StereoXch..
6-Channel Balanced OutputXport is an ultra-compact balanced audio output module for eurorack synthesizer systems. The module features six channels of precise level scaling with signal and peak indicators, and ¼-inch balanced outputs for professional audio use.Features- Eurorack to balanced line-leve..
Introducing the Eurorack Version of the Datanoise OctaWave ADAT DAC with Synthesizer GR logoSend Audio and/or CV into your Eurorack System with this small 4 HP EurorackModule.ADAT Optical Input (44/48 kHz)50mm depthSmall form factor - 4 HP widthPower Supply via Eurorack (130-150mA +12, 30mA -12v, 5v..
Module A-119 (External Input / Envelope Follower) is designed to allow external audio signals to be integrated into the System A-100. It comprises a pre-amp, envelope follower, and comparator.The pre-amp has two inputs: an unbalanced input for line level signals, with a gain factor of from 0 to 20, ..
two-channel headphone amplifiertwo audio inputs with level controlsInput 1 is normalled to Input 2common loudness/master level controlheadphone output (stereo 1/4" jack socket)max. output power ~ 2 W per channel (@ 8 Ohm load)DC coupled inputs and outputs (i.e. also useful for other applications lik..
Multicore Signal ConnectorA-180-9 can be used to connect up to 14 audio or control signals between different cases using standard RJ45 network cables. It can be used to pre-patch different cases and connect common signals (e.g. clock, start/stop, master CV) using only one or two RJ45 cables instead ..