Menu
Your Cart

Doepfer A-160-1 Clock/Trigger Divider II

Module A-160 is a frequency divider for clock/trigger/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses. The Trigger input will take clock signals from, eg., an LFO, MIDI sync, or the gate from a MIDI-CV interface.
At the outputs, you have access to the sub-divided clock signals, from half the clock frequency down to 1/64. The low/high levels of the output signals are 0V and about +10V.
The A-160 also has a reset input. Whenever a reset signal is sensed, all outputs are set to zero, until the reset voltage disappears.
The Clock Divider can be used in combination with the A-161 Clock Sequencer to produce stepped sequences with a length of from one to eight events.

For more detailed information please look at the English user's manual: A160_man.pdf

Similar modules:

  • A-152 Voltage Addressed Track&Hold / Switch (Multiplexer) / Digital Outputs
  • A-161 Clock/Trigger Sequencer
  • A-160-2 Clock Divider II
  • A-160-5 Clock Multiplier

Breite/Width: 4 TE / 4 HP / 20.0 mm
Tiefe/Depth: 40 mm (gemessen ab der Rückseite der Frontplatte / measured from the rear side of the front panel)
Strombedarf/Current: +40mA (+12V) / -0mA (-12V)