![Doepfer A-100 LC1 Low Cost Case Doepfer A-100 LC1 Low Cost Case](https://www.synthesizer.gr/image/cache/catalog/2%20modular%20systems/1DOEPFER/LC1-550x550w.jpg)
![Doepfer A-100 LC1 Low Cost Case Doepfer A-100 LC1 Low Cost Case](https://www.synthesizer.gr/image/cache/catalog/2%20modular%20systems/1DOEPFER/LC1%202-550x550w.jpg)
![Doepfer A-100 LC1 Low Cost Case Doepfer A-100 LC1 Low Cost Case](https://www.synthesizer.gr/image/cache/catalog/2%20modular%20systems/1DOEPFER/LC1%203-550x550w.jpg)
![Doepfer A-100 LC1 Low Cost Case Doepfer A-100 LC1 Low Cost Case](https://www.synthesizer.gr/image/cache/catalog/2%20modular%20systems/1DOEPFER/LC1-80x80w.jpg)
![Doepfer A-100 LC1 Low Cost Case Doepfer A-100 LC1 Low Cost Case](https://www.synthesizer.gr/image/cache/catalog/2%20modular%20systems/1DOEPFER/LC1%202-80x80w.jpg)
![Doepfer A-100 LC1 Low Cost Case Doepfer A-100 LC1 Low Cost Case](https://www.synthesizer.gr/image/cache/catalog/2%20modular%20systems/1DOEPFER/LC1%203-80x80w.jpg)
- Stock: In Stock
- Model: DOEPFER-A-100-LC1
More from this brand
The A-100LC1 is very similar to the A-100LC3 but offers only 48 HP for installation of modules. A-100LC3 is equipped with the power supply A-100SSB.
The case is made of raw wood without laquering. The case can be varnished by the customer in any desired color e.g. by means of a spray can.
It is also available with black coating :A-100LC1V
Quantity of bus boards: 1 (short version with 8 module connectors)
Electrical specifications: mains voltage: 110 ... 240V~ (IEC connector at the rear panel, the mains cable is not included because of the many different versions for different countries) output voltages/current: +12V/380mA, -12V/380mA, +5V/100mA (the +5V current is taken from the +12V supply, i.e. the sum of the +12V current and the +5V current has to be less than 380mA)
6U frame 7 connectors for modules