The QCD Expander is an expansion module for the Quad Clock Distributor (QCD).The QCD Expander adds a host of features, turning the QCD into a programmatic non-linear sequencer. Each channel gets a CV Trigger Delay (Pulse Width) jack and knob, an additional output jack with three selectable modes, an..
DescriptionThe mmMidi is a simple & compact MIDI to CV interface for your Eurorack synthesiser. It translates both MIDI clock and 2 Channels of MIDI note, velocity and gate information to corresponding voltage control signals. The mmMidi is quick to set up and requires minimal configuration.&nbs..
Total flexibility for the Befaco 7U or Intellijel cases rear connectors Jacks.The channels are reversible and can be used independently for Input or Output.4 Inputs or Outputs (per module) can be obtained by “Y” cables.Independent tip and ring attenuators are selectable for each channel to convert t..
Mutes goes above and beyond basic muting by allowing you to split groups of signals to multiple destinations, making it great for FX dub performing and varied signal routing.Vactrols on the circuit gives to the switching a pleasing decay for both audio and modulation as well a totally click fre..
Hexpander adds great functionality to Hexmix module. Featuring Three aux send with stereo returns, individual outputs for each channel, complete PFL system and balanced output.Hexpander is designed to be placed on top of Hexmix. Expanding Eurorack concept to 6U, allows every channel to be ..
You can attach up to four G8 expander to a DROID master. It will give you eight additional gate jacks. Each of these gate jacks...can be used as an input or as an output. This is switchable in your DROID patch.outputs either 0V or 5V when used as on outpu..
A-149-2 is an extension module for A-149-1. It makes available 8 digital random voltages (i.e. only low/high states like a gate signal). The outputs are controlled by the "Quantized Random Voltages" section of the assigned A-149-1 and correspond to the 8 digital outputs of the shift register th..
Stereo noise and random CV generatorErica Synths Black Code Source is unique design true stereo digital noise or dual random CV generator, using a complicated calculation of polynomials of various configurations. The module will fit ideally in percussion synthesis or random, self generation patches...
Erica Synths Black Code Source Expander takes the Code Source to next level by adding autobend feature and more noise/CV modes. Autobend provides a useful attack envelope for the internal clock generator’s pitch and some outside CV control. This feature helps to quickly achieve authentic chip-tune p..
Expansion module for the Sequential Switch v2SEQUENTIAL SWITCH CV EXPANDER is connected to the Sequential Switch via IN/OUT jack switching lugs, which means, if you patch something into IN/OUT jack, the relevant input gets disconnected from the CV Expander. If you use SS with CV Expander connec..
The ES-6 is the counterpart to the ES-3 Lightpipe/CV Interface, offering up to 8 channels of CV input with output via an optical lightpipe connection. As with the ES-3, the ES-6 also works well for audio signals, with conversion quality on a par with a regular audio interface (see her..
4 output CV expander for ES-5 and ES-4The ESX-4CV is an expansion module for the ES-4 or ES-5, adding four CV outputs from one expansion header.In order to squeeze four 12 bit channels through one 8 bit connection, the channels are time-multiplexed and so effectively run at one-eighth of the au..