The MX4 Buffered MIDI Multiple by 1010music serves a very simple but useful purpose: it takes in a single MIDI input and repeats it in real time to four MIDI outputs. The end result is you can now control four times as many devices from a single MIDI source.The MX4 uses TRS minijacks for h..
MIDI is a plug and play solution for interfacing with your computer or MIDI hardware. Four modes provide monophonic, duophonic, dual mono, and quad trigger operation.MIDI clock, CC messages, and note on messages are all easily accessible between the four modes. The status LED provides clear indicati..
DROID MASTER18 - Compact Universal CV Processor with MIDI/USBThe MASTER18 is a very flexible generic CV processor.You can think of the MASTER18 as a smaller and cheaper version of the DROID MASTER without CV inputs and LEDs, but with an integrated USB and MIDI, six additional gate jacks, t..
TRS Split - CV/Audio signal distributorTRS Split is a multipurpose CV and audio signal distribution module. It has three 3.5 mm TRS (tip/ring/sleeve - stereo) jacks and six ordinary 3.5 mm mono jacks.It contains 3 identical sections set up as following:Upper jack carries the tip signalMiddle jack ca..
TRS Tool - Stereo/Dual CV/Audio/MIDI signal multipurpose moduleTRS Tool is a multipurpose CV and audio signal distribution module for working with 3.5 mm stereo jacks (tip/ring/sleeve). These jacks are common for stereo audio but also for MIDI.The TRS TOOL has no active components and does not need ..
Welcome to the DROID X7 expander. The X7 gives you USB and MIDI connectivity for your master and also four gate outputs with modular levels.You can process incoming and generate outgoing MIDI streams, both via classical DIN cables and via USB. Both the in and the out direction su..
Module A-190-3 is a Midi/USB-to-CV/Gate interface that allows the integration of the A-100 system into a USB or Midi environment. It has available 4 analog control voltage outputs (CV1...4) and one Gate output. A-190-3 is the modular version of Dark Link.In/Outputs and controls:USBMidi Inp..
A-190-4 is the replacement for module A-190-1 which is no longer avaiulable. The functions of A-190-1 and A-190-4 are nearly the same (Midi In, Midi Out, CV1, CV2, Gate, Clock, Reset). But the operation of the A-190-4 has been improved because a 3-digit LED display is available. The c..
Module A-190-5 is a four voice Midi/USB to CV/Gate interface. For each voice a pitch control voltage (CV1, 1V/octave standard to control VCOs), a gate output (to control envelope generators) and two additional control voltages (CV2, CV3) are available. The two additional CV outputs can be controlled..
Module A-190-8 is a Midi/USB to Sync interface. The main application of the module is the control of clocked A-100 modules like sequencers (A-155), sequencer controllers (A-154), trigger divider (A-160 or A-163), trigger sequencer (A-161) and similar units. It may be used also to res..
Module A-192-2 contains two independent CV/Gate-to-Midi/USB interfaces. For each of the two sub-units these inputs are available: Gate Input (min. +5V)CVN Input (defines the Midi note number), 1V/octave standard, range 0...+10V (i.e. 10 octaves)CVV Input (defines the velocity value assigned to ..