Erica Synths Fusion Mixer V3

Erica Fusion dual Mixer module is designed to mix and overdrive audio signals on the vacuum tube.

Use Fusion Mixer as two independent 3-input mixers (also for stereo signal mixing) or 6-input mixer. Special feature of the Fusion Mixer – great tube overdrive effects when level knobs are set to 3 o’clock and above. When used with drum machines, it even emulates sidechain compressors. When used to mix signasl from VCOs Fusion Mixer works as waveshaper, especially, if pulse width modulated pulse signals is used in one of inputs.

All Fusion modules by default are configured to work with regular eurorack PSU.

Due to the fact that cold tube heaters have lower resistance, Fusion modules have significant power consumption peak at startup, when power consumption almost doubles for 1-2 seconds. This is not a problem with linear PSUs that have power inertia, but may cause switching PSU internal protection turn off the power supply. Please make sure your PSU has some headroom before installing multiple Fusion modules.

      Features:

• 6 audio inputs
• Two independent 3-input mixer
• Sum of all 6-inputsTechnical specifications:

  Input signal level	up to 20V ptp
  Output signal level	10V ptp
  Mixer GAIN	1
  Power supply	bipolar +-12V , eurorack standard
  Power consumption	Eurorack PSU configuration: 160mA@+12V, 10mA@-12V
  Module width	14HP
  Module depth	25mm

   

  Please, reffer to user manual below for possible power supply configurations

   

  Erica Fusion Mixer on Modulargrid

• Soft tube overdrive