Clk is a voltage controlled clock generator with all of the features a master clock needs. It has an extremely wide range from ten seconds between pulses well into audio rate. In addition, the pause button and CV input provide an expressive feature that is all too often missing in a modular setup. S..
2hp - DIV is a 2 channel, voltage controlled clock divider and multiplier. Incoming clock signals can be multiplied or divided by a factor of 16 with a multitude of values in between.CV inputs provide external control of the current clock rate, allowing for the creation of dynamic rhythms from ..
Rnd is a random voltage generator and random gate source with an internal clock. The output is a quantized random voltage between 0V and 10V. The attenuator control provides fine-tuning of the random voltage.This allows for a musically useful range to be defined. In addition, random gates are emitte..
The Pingable Envelope Generator (PEG) from 4ms is a dual envelope generator whose envelope lengths are set by incoming clocks or "pings".The PEG has full CV control of envelope shape, skew, and ping (clock) division/multiplication, as well as a plethora of triggering and cycling options (AD, AR, qua..
Four channel voltage controlled Clock Divider/Multiplier with master Tap Tempo. Each channel can be synced to the tap tempo, to the channel above, or to an external clock. Each channel also has a reset jack.With a Tap Tempo button and five sync'ed clock outputs, the QCD is a versatile head-of-the-ch..
The SCM Plus is a clock multiplier with eight gate outputs and complex beat manipulation features. It combines the classic Shuffling Clock Multiplier (SCM) and SCM Breakout (SCMBO) into a single module using higher precision hardware than its predecessors.Eight gate outputs, each multiplying up to x..
DescriptionThe mmMidi is a simple & compact MIDI to CV interface for your Eurorack synthesiser. It translates both MIDI clock and 2 Channels of MIDI note, velocity and gate information to corresponding voltage control signals. The mmMidi is quick to set up and requires minimal configuration.&nbs..
’Pamela’s PRO Workout’ is a compact programmable clocked modulation source for your Eurorack modular synthesiser system. It provides 8 highly editable outputs producing various control voltage signals, all correlated and synced to a BPM based master clock.Each output can produce anything from simple..
AtoVproject - Gaeto The AtoVproject Gaeto is a new type of clocked logic module.Gaeto is a great module to play around with triggers, gates and legatoes turning one into the other. As a result we decided to name the module Gaeto from “Gate” and “Legato”.Some of the functions that the module can..
The AtoVproject lx-euclid is a 4-channel trigger sequencer with a standout feature: two touch-sensitive rings that redefine hands-on control. These rings, paired with full colour circular display, offer an unparalleled, intuitive interface designed for fast, real-time performance. The touch rings ma..
Burst is a Pingable Trigger Burst generator with distribution, probability, and time division control. It will create multiplications of your triggers, leading to doubles, triplets, quintuplets, and true polyrhythms for your modular system.FEATURESCustom trigger bursts up to 64 triggers.Voltage Cont..
Muxlicer is a sequential signal processor designed to add a huge range of special functions to your modular setup in the minimum space.Is divided into three main blocks: a Digital Step Controller, a Gate Generator, and an Analog Switch (a.k.a. Mux/DeMux)The module is designed with a h..