Boss OD-200

Boss OD-200 Hybrid Drive Pedal

The Boss OD-200 Hybrid Drive brings next-level sound, feel, and flexibility to overdrive and distortion, combining decades of BOSS tone expertise with innovative technologies. This dream pedal is capable of producing any drive tone you can imagine, offering 12 unique modes, hybrid analog/digital circuitry, three-band EQ, and powerful pre and post boosts for ultra-detailed gain shaping. There's even an advanced gate circuit on board, ideal for both eliminating noise and adding tightness and aggression to high-gain drive tones.

With the 200 series, BOSS introduces a new generation of pedals that pack advanced sound and versatility into a streamlined size that saves space on your board. Grab-and-go controls and multi-function switches make operation easy and intuitive, while onboard memories allow you to store multiple setups for instant recall. All 200 series pedals feature premium audio quality with 32-bit AD/DA, 32-bit internal processing, and 96 kHz sampling rate, as well as support for additional control via external switches, an expression pedal, or MIDI.

 Sampling Frequency: 96 kHz
- AD/DA Conversion: 32 bits
- Processing: 32-bit floating point
- Drive Circuit: Analog + Digital
- Modes: 12 modes (Overdrive, Blues, Scream, Cntr Od, X-Drive, Dist, X-Dist, Stack Drive, Fat Dist, Brown, X-Metal, Fuzz)
- Memory: 4 + Manual
- Nominal Input Level:
INPUT: -10 dBu
- Maximum Input Level:
INPUT: +7 dBu
- Input Impedance:
INPUT: 1 M ohm
- Nominal Output Level:
OUTPUT: -10 dBu
- Maximum Output Level:
OUTPUT: +7 dBu (Load Impedance: 220 k ohms or greater)
- Output Impedance:
OUTPUT: 1 k ohms
- Recommended Load Impedance:
OUTPUT: 10 k ohms or greater
- Bypass: Buffered bypass
- Controls:
ON/OFF switch, MEMORY/BOOST switch
MODE knob, DRIVE knob, LEVEL knob, PARAM knob, LOW knob, MIDDLE knob, HIGH knob
PARAM button, MEMORY button
- Display: 7 segments, 3 characters (LED)
- Indicator: PARAM indicator, MEMORY (MAN, 1--4) indicators
- Connectors:
INPUT jack, OUTPUT jack: 1/4-inch phone type
CTL 1, 2/EXP jack: 1/4-inch TRS phone type
MIDI (IN, OUT) jacks: Stereo miniature phone type
DC IN jack
USB port: USB micro B-type (program update only)
- Power Supply: Alkaline battery (AA, LR6) x 3, AC adaptor (sold separately)
- Current Draw: 220 mA (Expected Battery Life Under Continuous Use)
- Alkaline: Approx. 6 Hours (These figures will vary depending on the actual conditions of use.)
- Dimensions:
101 (W) x 138 (D) x 63 (H) mm / 4 (W) x 5-7/16 (D) x 2-1/2 (H) inches
101 (W) x 138 (D) x 65 (H) mm / 4 (W) x 5-7/16 (D) x 2-9/16 (H) inches (including rubber foot)
- Weight:
600 g / 1 lb 6 oz
670 g / 1 lb 8 oz (including batteries)
- Accessories:
Owner's Manual
Leaflet "USING THE UNIT SAFELY"
Alkaline battery (AA, LR6) x 3
Rubber foot x 4

- Options (sold separately):
- AC adaptor: PSA-S series
- Footswitch: FS-5U
- Dual footswitch: FS-6, FS-7
- Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
- MIDI/TRS connecting cable: BMIDI-5-35
* 0 dBu = 0.775 Vrms