Power Supplies

5030      CIOKS Flex 5 – 30cm (12″) with tip positive angled 3,5mm jack plug (black)Type 5 Flex cables are black and fitted with a tip positive 3,5mm jack plug also called mini jack. This Flex cable standard is quite common mainly in older pedals like those from Electro-Harmonix or DO..

5050      CIOKS Flex 5 – 50cm (20″) with tip positive angled 3,5mm jack plug (black)Type 5 Flex cables are black and fitted with a tip positive 3,5mm jack plug also called mini jack. This Flex cable standard is quite common mainly in older pedals like those from Electro-Harmonix or DO..

6030    CIOKS Flex 6 – 30cm (12″) with 9V battery snap (black)Type 6 Flex cables are black and fitted with a 9V battery snap or clip if you like. This Flex cable should be used with 9V battery powered pedals which don’t have an adapter input socket e.g. vintage Wah pedals or some MXR ..

6050    CIOKS Flex 6 – 50cm (20″) with 9V battery snap (black)Type 6 Flex cables are black and fitted with a 9V battery snap or clip if you like. This Flex cable should be used with 9V battery powered pedals which don’t have an adapter input socket e.g. vintage Wah pedals or some MXR ..

7050    CIOKS Flex 7 – 50cm with 2 pin DIN plug (blue)Type 7 Flex cable is blue and fitted with a straight 2 pin DIN plug. This plug type was widely used in older loudspeakers but the only pedals we know which use this standard are eight older vacuum tube pedals from Electro-Harm..

Cioks DC powercable for KORG Volca and Elektron.4.75/1.7mm DC plug with positive centerCan power Korg Volca and Elektron Digitakt, Digitone and Analog Heat MKII from an isolated Cioks power supply with sufficient mA.Lenght:50cm..

Parallel adapter Flex – sand greyBy using two isolated outlets the Parallel adapter Flex gives you the sum of max. Currents of the two isolated outlets used. This adapter cable should be used in combination with any of CIOKS standard Flex cables if you need to power pedals with higher current needs...

This little accessory allows Pedaltrain users to mount Cioks SOL, Cioks 8, DC7 and DC7 to their pedalboards without having to drill any holes nor use Velcro in order to attach their CIOKS power supply to a Pedaltrain board. The steel-made Grip v2 simply holds on the pedalboard frame by the pressure ..

Link CableConnects CIOKS 4 with CIOKS DC7 or supplies a 24V device via the 24V DC link outputConnector: EIAJ to type 2 (black/red)Length: 160 cm..

Mounting kit made to attach a Cioks power from the Professional Series (AC8, DC8, AC10, DC8, TC10) under a Pedaltrain pedalboard (from model Pedaltrain 8). Be careful that this kit doesn't work with other Cioks power supplies becasuse they are thicker.The kit includes:- 2 rubber feet of 24,5 mm diam..

Product OverviewThe Heart and SOL of Your Pedalboard SOL is the ultimate solution for bringing life to a small to medium-sized pedalboard setup, especially if you are using power-hungry pedals. SOL is the smallest mains-powered switch-mode power supply we make at CIOKS (no wall-warts here) and the n..