TRS Split - CV/Audio signal distributorTRS Split is a multipurpose CV and audio signal distribution module. It has three 3.5 mm TRS (tip/ring/sleeve - stereo) jacks and six ordinary 3.5 mm mono jacks.It contains 3 identical sections set up as following:Upper jack carries the tip signalMiddle jack ca..
TRS Tool - Stereo/Dual CV/Audio/MIDI signal multipurpose moduleTRS Tool is a multipurpose CV and audio signal distribution module for working with 3.5 mm stereo jacks (tip/ring/sleeve). These jacks are common for stereo audio but also for MIDI.The TRS TOOL has no active components and does not need ..
Modules A-180-1 and A-180-2 are simple multi-connectors. They have eight inter-connected sockets, so that you can "multiply" any audio or control signal. From the factory the modules come as two four-fold multiples. But they can be modified as an eight-fold multiple (solder bridge on the pcb). Thoug..
Module A-180-3 is a dual buffered 1-in-3 multiple. The signal applied to the input socket appears as a buffered signal at the three output sockets. Each output has it's own buffer, i.e. the three output sockets are not simply connected to each other. The lower output of the upper unit is normalled i..
OVERVIEWThe A-180-4 consists of four buffer circuits for control voltages. A buffer serves to avoid a voltage drop. This can occur due to different loads. The lower three units are each normalized to the previous output, so that the module can also be used as a buffered multiple by leaving the lower..
Multicore Signal ConnectorA-180-9 can be used to connect up to 14 audio or control signals between different cases using standard RJ45 network cables. It can be used to pre-patch different cases and connect common signals (e.g. clock, start/stop, master CV) using only one or two RJ45 cables instead ..
Two multiples with one 1/4 jack socket and two 3.5mm jack sockets each, upper multiple is wired monophonic, lower is wired stereophonic.For more detailed information please look at the English user's guide: A181_man.pdfBreite/Width: 4 TE / 4 HP / 20.0 mmTiefe/Depth: 30 mm (gemessen ab der Rücks..
Module A-182-1 is a simple passive multi-connector similar to the multiples modules A-180-1/A-180-2. In contrast to modules A-180-1/2 each socket is equipped with a 3-position switch that allows to connect the corresponding socket to the internal bus #1 (left position), bus #2 (right position) ..
module a-185-2 is a precision control voltage adder/buffer. precision means that the amplification of the inputs without attenuators is exactly 1.00 and is suitable to add control voltages for the pitch control of vcos (e.g. from keyboard + sequencer 1 + sequencer 2).the module is equipped with four..
2hp Power supply + Dual Passive Mult• portable 2hp power module for compact skiff cases with dual passive mults• 12 to 20V DC input• up to 1A from +12V,• up to 700mA from -12V via flying bussboard..
The Cursible from Sacrament Modular brings effects morphing (and much more) to the Eurorack format. The Cursible is a 14HP 6 channel, morphing effects-send matrix with an incredible feature set and a vast amount of applications from morphing / sequencing through and blending effects through to cadav..
Advanced replacement for stackable patchcables. Everyone, who’s more deep into electronics, will point that stackable patchcables are not really wise choice for such sensitive things as music instruments, because they mechanically connect electrical signals and this can damage modules in worst case ..