Expansion module for the Sequential Switch v2SEQUENTIAL SWITCH CV EXPANDER is connected to the Sequential Switch via IN/OUT jack switching lugs, which means, if you patch something into IN/OUT jack, the relevant input gets disconnected from the CV Expander. If you use SS with CV Expander connec..
Gate/Clock/Trigger expander for the FH-2The FHX-8GT is an expansion module for the FH-2 'factotum' Eurorack module, providing 8 extra clock/gate/trigger outputs.Up to four FHX-8GTs can be attached to one FH-2. Each FHX-8GT can also be expanded with the ESX-8GT, for a total of 64 outputs.This is in a..
The ES-10 is a Eurorack 8-in/8-out ADAT interface, with DC-coupled inputs and outputs that can be used for both audio and CVs.Each input can be individually selected for modular or line level operation.The outputs can be expanded via the ES-5 module.The ES-10 uses AKM 'VELVET SOUND' DACs a..
The ES-5 is an expansion module for the Expert Sleepers ES-3 Lightpipe/CV Interface or ES-8 USB Audio Interface.It piggybacks on one of the ES-3's (or ES-8's) stereo channels to provide eight gate/clock/sync/MIDI outputs on the ES-5 itself, plus further expansion headers to connect up..
The ES-6 is the counterpart to the ES-3 Lightpipe/CV Interface, offering up to 8 channels of CV input with output via an optical lightpipe connection. As with the ES-3, the ES-6 also works well for audio signals, with conversion quality on a par with a regular audio interface (see her..
4 output CV expander for ES-5 and ES-4The ESX-4CV is an expansion module for the ES-4 or ES-5, adding four CV outputs from one expansion header.In order to squeeze four 12 bit channels through one 8 bit connection, the channels are time-multiplexed and so effectively run at one-eighth of the au..
The ESX-8CV is an expansion module for the ES-4, ES-40 or ES-5, adding eight CV outputs from one expansion header.In order to squeeze eight 12 bit channels through one 8 bit connection, the channels are time-multiplexed and so effectively run at between one-third and one-twenty f..
The ESX-8GT is an expansion module for the ES-4, ES-40 or ES-5, adding 8 on/off outputs for use as gates, triggers, clocks etc. from one expansion header.The ES-4/5 Controller software (part of Expert Sleepers Silent Way) also allows the ESX-8GT outputs to be used for DIN sy..
8 extra CV outputs for the FH-1/2The FHX-8CV is an expansion module for the FH-2 'factotum' Eurorack module, providing 8 extra CV outputs.Up to seven FHX-8CVs can be attached to one FH-2 for a total of 64 CV outputs.This is in addition to the four FHX-8GTs that can be added to an FH-2 for extra gate..
MIDI Interface for the TRAX! sequencerThe MIDI BUS was designed to be a MIDI interface for the eurorack system, and more specifically to offer MIDI inputs and outputs for our TRAX performance sequencer.This device provides opto-isolation of the MIDI input and buffers all MIDI signals.The MIDI BUS pr..
TG5 Gristleizer Pre-AmplifierThe Gristleizer Pre-Amplifier is a new addition to the existing circuity of Roy Gwinn's "Guitar Effects Pedal" design. After Chris Carter's suggestion of a guitar pre-amplifier for use with the rest of the Gristleizer series, the TG5 came into being. Based upon Jonn..
Front access to the Lúbadh's USB port via 2hp expansion*Included in the Instruo Lubadh v2 Expansion PackThe Lúbadh V2.0 firmware pack includes everything you need to get started with thenew update. Plug and play!A 2HP expander module introduces front access to the Lúbadh's USB port for extra conveni..