Gliss is a 4 HP Eurorack module using a recordable touch sensor to introduce gestural control into modular systems. Gliss simultaneously produces two high-resolution signals: one following your finger’s position, the other following touch size. These signals are available via two CV outputs, of..
Mr. Phil Ter isn’t the smartest name for a module that has an envelope generator, VCA, and a filter in it. Well, we never claimed to be smart. Mr. Phil Ter, or Phil as we affectionately call it, is a module that does a whole bunch of analog and digital stuff, in not a lot of HP. Phil’s digital bits ..
The Looping VC-ADSR is a 4-stage, loop-able, envelope generator based on the ENVGEN 8C IC from Electric Druid. The individual sections of the Envelope (Attack, Decay, Sustain, Release, Level and Time) can all be individually controlled via CV.The module has 5 MODES of operation that can be selected ..
Do you want to get started with a decent Droid system and get a good price? Or you are not sure which expanders to buy? Then this kit is perfect for you. The selection is based on the experience and suggestions of many users and comes at a good price. In one nice big box you get:1 DRO..
Module A-140 is an envelope generator, and, since it puts out control voltages, counts as one of the modulation devices in a modular system. As soon as the gate input receives sufficient voltage, the ADSR generates a variable voltage, changing in time, called an envelope. This varying voltage is out..
The A-140-2 contains two classic ADSR envelopes, which can be configured using jumpers. For example, it is possible to determine which parameters are influenced by external control voltages or whether inverted CV signals are emitted in addition to normal signals.The module A-140-2 is composed of two..
Module A-141-2 is the successor of the obsolete former VCADSR module A-141. Compared to the A-141 a lot of improvements and expansions have been added:common control voltage input for all time parameters (A/D/R), range switch for three different time ranges, inverted ADSR output, additional out..
A-141-4 is a quad voltage controlled Envelope generator and is primarily planned for polyphonic applications. The module contains four ADSR type voltage controlled envelope generators with exponential curve shapes (charge/discharge curves of a capacitor). Common manual controls and CV inputs with po..
Module A-142-1 is a voltage controlled envelope generator. The only time parameter is decay (like TB303). Decay may be adjustes manual and via voltage control input (with attenuator). The envelope output is displayed with LED control. Additionally from the envelope signal a Gate signal and an invers..
Module A-142-2 contains two envelope controlled VCAs behind a front panel with 8 HP only. Each of the two sub-units is the combination of a simple AD/ADSR/AR envelope generator and a VCA. The type of envelope can be selected by means of a toggle switch:AD: Attack-DecayAR: Attack-ReleaseADSR: At..
Module A-142-4 contains four simple envelope generators. The only time parameter is Decay and can be adjusted manuall by means of the Dec. control in the range 2 ms ... 2 seconds. The attack time can be adjusted internally by means of a separate trimming potentiometer for each sub-unit in ..