-285x169.png "S.F.R.")
Search Criteria
Products meeting the search criteria
Brand: Schlappi Engineering
Model: SCHLAPPI-ENGINEERING-100-GRIT
SCHLAPPI ENGINEERING - 100 GRITTOUCH CONTROLLED DISTORTION WITH VCF/VCA 8 brass touchpoints2 inputs to transistor core low pass filterVoltage control over frequency, resonance, and gainOTA VCA with soft saturation characteristicsDistortion circuit based around a vintage headphone amplifier..
309.00€
Ex Tax:259.66€
Brand: Schlappi Engineering
Model: SCHLAPPI-ENGINEERING-ANGLE-GRINDER
SCHLAPPI ENGINEERING – ANGLE GRINDERQUADRATURE OSCILLATOR, FILTER, AND WAVESHAPERQuadrature Sine wave VCO with four phase related outputs: 0°, 90°, 180°, 270°HIGH range from 10Hz to over 20kHzLOW range from 0.1Hz to over 500HzTracks volts per octave at the V/OCT inputFM1 is selectable linear or expo..
329.00€
Ex Tax:276.47€
Brand: Schlappi Engineering
Model: SCHLAPPI-ENGINEERING-BOUNDARY
The Boundary is a multi-purpose modulation and signal control center. It consists of a cycling slew and a four quadrant multiplier (VCA). Features:LFO and modulation oscillator (from cycles measured in minutes to high audio rate)Trig input can be used for attack-decay envelopeSlew input can be ..
238.00€
Ex Tax:200.00€
Pre-Order
Brand: Schlappi Engineering
Model: SCHLAPPI-ENGINEERING-BTMX
BTMX (BitMix) gives hands on control over logic and rhythmic gate signals with a switch for every input and 4 different logic functions.It is a 4 channel selectable logic function module, with each channel having two inputs. All channels share the same logic function and the gate outs are summed wit..
219.00€
Ex Tax:184.03€
Brand: Schlappi Engineering
Model: SCHLAPPI-ENGINEERING-INTERSTELLAR-RADIO
DESTRUCTIVE TRANSMISSION LINESimulates the process of modulating and demodulating a signal for radio transmissionEffect or complex oscillator (non v/oct)Voltage controlled aliasing, distortion, and frequency modulation effectsTwo wide ranging voltage controlled square wave oscillators with individua..
218.00€
Ex Tax:183.19€
Brand: Schlappi Engineering
Model: SCHLAPPI-ENGINEERING-NIBBLER
The Nibbler is a four bit digital accumulator based on CMOS logic. This means that it counts in binary from zero to fifteen, with inputs and outputs for individual bits as well as stepped voltage outputs (digital to analog converters). It does this with individual logic chips instead of a CPU.The co..
269.00€
Ex Tax:226.05€
Pre-Order
Brand: Schlappi Engineering
Model: SCHLAPPI-ENGINEERING-THREE-BODY
The Three Body is a phase and frequency modulation toolkit, designed to bring digital techniques to an analog interface. It consists of three oscillators which can be used independently but which have normalized connections to facilitate exploration and improvisation.Features:Three separate high qua..
649.00€
Ex Tax:545.38€
Pre-Order
Brand: Sonocurrent
Model: MT2D
The Sonocurrent M T2D dual triode distortion is a tube-based distortion module for the Eurorack format, with two independent channels which can be used in series for heavier distortion or patched separately for stereo or multiple sources. Spectral tilt filters at the inputs can alternately..
399.00€
Ex Tax:335.29€
Showing 1 to 8 of 8 (1 Pages)